国际标准化组织ISO发布的消防标准文件

国际标准化组织ISO发布的消防标准文件

序号 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 标准文件代号 英文名称 ISO 3679:2004 Determination of flash point -- Rapid equilibrium closed cup method ISO 3941:1977 Classification of fires Explosion protection systems -- Part 1: Determination of explosion indices of combustible dusts in air Explosion protection systems -- Part 2: Determination of explosion indices of combustible gases in air Explosion protection systems -- Part 3: Determination of explosion ISO 6184-1:1985 ISO 6184-2:1985 ISO 6184-3:1985 indices of fuel/air mixtures other than dust/air and gas/air mixtures ISO 6184-4:1985 Explosion protection systems -- Part 4: Determination of efficacy of explosion suppression systems Fire protection -- Safety signs Equipment for fire protection and fire fighting -- Graphical symbols for fire protection plans -- Specification ISO 6309:1987 ISO 6790:1986 Fire protection -- Vocabulary -- Part 1: General terms and phenomena ISO 8421-1:1987 of fire ISO 8421-2:1987 Fire protection -- Vocabulary -- Part 2: Structural fire protection ISO 8421-3:1989 Fire protection -- Vocabulary -- Part 3: Fire detection and alarm ISO 8421-4:1990 Fire protection -- Vocabulary -- Part 4: Fire extinction equipment ISO 8421-5:1988 Fire protection -- Vocabulary -- Part 5: Smoke control Fire protection -- Vocabulary -- Part 6: Evacuation and means of escape Fire protection -- Vocabulary -- Part 7: Explosion detection and suppression means ISO 8421-6:1987 ISO 8421-7:1987 Fire protection -- Vocabulary -- Part 8: Terms specific to fire-fighting, ISO 8421-8:1990 rescue services and handling hazardous materials ISO 16852:2008 Flame arresters -- Performance requirements, test methods and

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 limits for use Fire fighting -- Portable fire extinguishers -- Performance and construction Fire fighting -- Wheeled fire extinguishers -- Performance and construction Fire protection -- Portable and wheeled fire extinguishers -- Part 1: Selection and installation Fire protection -- Portable and wheeled fire extinguishers -- Part 2: Inspection and maintenance ISO 7165：1999 ISO 11601:2008 ISO11602-1：2000 ISO11602-2：2000 ISO 7240-1:2005 Fire detection and alarm systems -- Part 1: General and definitions Fire detection and alarm systems -- Part 2: Control and indicating equipment ISO 7240-2:2003 ISO 7240-4:2003 Fire detection and alarm systems -- Part 4: Power supply equipment ISO 7240-5:2003 Fire detection and alarm systems -- Part 5: Point-type heat detectors Fire detection and alarm systems -- Part 6: Carbon monoxide fire detectors using electro-chemical cells Fire detection and alarm systems -- Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization Fire detection and alarm systems -- Part 8: Carbon monoxide fire ISO 7240-8:2007 detectors using an electro-chemical cell in combination with a heat sensor ISO/TS 7240-9:2006 ISO 7240-10:2007 ISO 7240-11:2005 ISO 7240-12:2006 ISO 7240-13:2005 Fire detection and alarm systems -- Part 9: Test fires for fire detectors Fire detection and alarm systems -- Part 10: Point-type flame detectors Fire detection and alarm systems -- Part 11: Manual call points Fire detection and alarm systems -- Part 12: Line type smoke detectors using a transmitted optical beam Fire detection and alarm systems -- Part 13: Compatibility assessment of system components ISO 7240-6:2004 ISO 7240-7:2003

34 ISO/TR 7240-14:2003 Fire detection and alarm systems -- Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings Fire detection and alarm systems -- Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor Fire detection and alarm systems -- Part 16: Sound system control and indicating equipment Fire detection and alarm systems -- Part 19: Design, installation, commissioning and service of sound systems for emergency purposes Fire detection and alarm systems -- Part 21: Routing equipment Fire detection and alarm systems -- Part 22: Smoke-detection equipment for ducts Fire detection and alarm systems -- Part 28: Fire protection control equipment Fire detection and fire alarm systems -- Smoke alarms Fire protection -- Automatic sprinkler systems -- Part 1: Requirements and test methods for sprinklers Fire protection -- Automatic sprinkler systems -- Part 2: 35 36 37 38 39 40 41 42 43 44 45 46 47 48 ISO 7240-15:2004 ISO 7240-16:2007 ISO 7240-19:2007 ISO 7240-21:2005 ISO 7240-22:2007 ISO 7240-28:2007 ISO 12239:2003 ISO 6182-1:2004 ISO 6182-2:2005 Requirements and test methods for wet alarm valves, retard chambers and water motor alarms ISO 6182-3:2005 Fire protection -- Automatic sprinkler systems -- Part 3: Requirements and test methods for dry pipe valves Fire protection -- Automatic sprinkler systems -- Part 4: Requirements and test methods for quick-opening devices Fire protection -- Automatic sprinkler systems -- Part 5: Requirements and test methods for deluge valves Fire protection -- Automatic sprinkler systems -- Part 6: Requirements and test methods for check valves Fire protection -- Automatic sprinkler systems -- Part 7: ISO 6182-4:1993 ISO 6182-5:2006 ISO 6182-6:2006 ISO 6182-7:2004 Requirements and test methods for Early Suppression Fast Response (ESFR) sprinklers

49 50 序号 51 52 53 54 Fire protection -- Automatic sprinkler system -- Part 8: Requirements ISO 6182-8:2006 and test methods for pre-action dry alarm valves Fire protection -- Automatic sprinkler system -- Part 9: Requirements ISO 6182-9:2005 and test methods for water mist nozzles 标准文件代号 ISO 6182-10:2006 ISO 6182-11:2003 ISO 7202:1987 英文名称 Fire protection -- Automatic sprinkler systems -- Part 10: Requirements and test methods for domestic sprinklers Fire protection -- Automatic sprinkler systems -- Part 11: Requirements and test methods for pipe hangers Fire protection -- Fire extinguishing media -- Powder Fire extinguishing media -- Foam concentrates -- Part 1: ISO 7203-1:1995 Specification for low expansion foam concentrates for top application to water-immiscible liquids Fire extinguishing media -- Foam concentrates -- Part 2: ISO 7203-2:1995 Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids Fire extinguishing media -- Foam concentrates -- Part 3: ISO 7203-3:1999 Specification for low expansion foam concentrates for top application to water-miscible liquids ISO 7201-1:1989 Fire protection -- Fire extinguishing media -- Halogenated hydrocarbons -- Part 1: Specifications for halon 1211 and halon 1301 Fire protection --Fire extinguishing media -- Halogenated ISO 7201-2:1991 hydrocarbons -- Part 2: Code of practice for safe handling and transfer procedures of halon 1211 and halon 1301 ISO 5923:1989 Fire protection -- Fire extinguishing media -- Carbon dioxide Fire protection equipment -- Carbon dioxide extinguishing systems for use on premises -- Design and installation Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 1: General requirements Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 2: CF3I extinguishant Gaseous fire-extinguishing systems -- Physical properties and 55 56 57 58 59 60 61 62

ISO 6183:1990 ISO 14520-1:2006 ISO 14520-2:2006 ISO

63 64 65 66 67 68 69 70 71 72 73 74 75 76 14520-3:2006 ISO 14520-4:2006 ISO 14520-6:2006 ISO 14520-7:2006 ISO 14520-8:2006 ISO 14520-9:2006 ISO 14520-10:2005 ISO 14520-11:2005 ISO 14520-12:2005 ISO 14520-13:2005 ISO 14520-14:2005 ISO 14520-15:2005 ISO/TS 20885:2003 ISO 10156:1996 system design -- Part 3: FC-2-1-8 extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 4: FC-3-1-10 extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 6: HCFC Blend A extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 7: HCFC 124 extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 8: HCFC 125 extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 9: HFC 227ea extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 10: HFC 23 extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 11: HFC 236fa extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 12: IG-01 extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 13: IG-100 extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 14: IG-55 extinguishant Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 15: IG-541 extinguishant Gaseous fire-extinguishing systems -- Area coverage test methods -- Engineered and pre-engineered extinguishing units Gases and gas mixtures -- Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets Components for fire-extinguishing systems using gas-- 77 ISO 16003:2008 Requirements and test methods -- Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves 78

ISO 21927-1:2008 ISO Smoke and heat control systems -- Part 1: Specification for smoke barriers Smoke and heat control systems -- Part 2: Specification for natural

79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 21927-2:2006 ISO 21927-3:2006 smoke and heat exhaust ventilators Smoke and heat control systems -- Part 3: Specification for powered smoke and heat exhaust ventilators ISO 4642:1978 Rubber products -- Hoses, non-collapsible, for fire-fighting service ISO 8191-1：1987 ISO 8191-2：1988 ISO/IEC 13943:2008 Furniture -- Assessment of the ignitability of upholstered furniture -- Part 1: Ignition source: smouldering cigarette Furniture -- Assessment of ignitability of upholstered furniture -- Part 2: Ignition source: match-flame equivalent Fire safety -- Vocabulary ISO 1182:2002 Reaction to fire tests for building products -- Non-combustibility test Reaction to fire tests for building products -- Determination of the heat of combustion Tests for measuring \"reaction-to-fire\" of building materials -- Their development and application Reaction to fire tests -- Ignitability of building products using a radiant heat source Reaction to fire tests -- Spread of flame -- Part 1: Guidance on flame spread Reaction to fire tests -- Spread of flame -- Part 2: Lateral spread on building products in vertical configuration ISO 1716:2002 ISO/TR 3814:1989 ISO 5657:1997 ISO/TS 5658-1:2006 ISO 5658-2:1996 Reaction to fire tests -- Spread of flame -- Part 4: Intermediate-scale ISO 5658-4:2001 test of vertical spread of flame with vertically oriented specimen ISO 5660-1:2002 Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method) Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 2: Smoke production rate (dynamic measurement) Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 3: Guidance on measurement Fire tests -- Reaction to fire -- Smoke generated by building products (dual-chamber test) ISO 5660-2:2002 ISO/TR 5660-3:2003 ISO/TR 5924:1989

96 97 98 99 100 序号 101 102 103 104 105 106 107 ISO 9239-1:2002 Reaction to fire tests for floorings -- Part 1: Determination of the burning behaviour using a radiant heat source Reaction to fire tests for floorings -- Part 2: Determination of flame spread at a heat flux level of 25 kW/m2 Fire tests -- Full-scale room test for surface products ISO 9239-2:2002 ISO 9705:1993 ISO/TR 9705-2:2001 ISO/TR 11696-1:1999 Reaction-to-fire tests -- Full-scale room tests for surface products -- Part 2: Technical background and guidance Uses of reaction to fire test results -- Part 1: Application of test results to predict fire performance of internal linings and other building products 英文名称 标准文件代号 ISO/TR 11696-2:1999 Uses of reaction to fire test results -- Part 2: Fire hazard assessment of construction products ISO/TR 11925-1:1999 Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 1: Guidance on ignitability ISO 11925-2:2002 Reaction to fire tests- Ignitability of building products subjected to direct impingement of flame -Part 2: Single-flame source test ISO 11925-3:1997 Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 3: Multi-source test ISO 13784-1:2002 Reaction-to-fire tests for sandwich panel building systems -- Part 1: Test method for small rooms ISO 13784-2:2002 Reaction-to-fire tests for sandwich panel building systems -- Part 2: Test method for large rooms ISO 13785-1:2002 Reaction-to-fire tests for façades -- Part 1: Intermediate-scale test ISO Reaction-to-fire tests for façades -- Part 2: Large-scale test

108 109 110 111 112 113 114 115 116 117 118 119

13785-2:2002 ISO/TR 14696:1999 Reaction to fire tests -- Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL) Fire tests -- Calibration and use of radiometers and heat flux meters -- Part 1: General principles ISO/TS 14934-1:2002 ISO 14934-2:2006 Fire tests -- Calibration and use of heat flux meters -- Part 2: Primary calibration methods ISO 14934-3:2006 Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method ISO/TS 14934-4:2007 Fire tests -- Calibration of heat flux meters -- Part 4: Guidance on the use of heat flux meters in fire tests ISO/TS 17431:2006 Fire tests-- Reduced-scale model box test ISO 17554:2005 Reaction to fire tests -- Mass loss measurement ISO/TS 22269:2005 Reaction to fire tests -- Fire growth -- Full-scale test for stairs and stair coverings ISO 27368:2008 Analysis of blood for asphyxiant toxicants -- Carbon monoxide and hydrogen cyanide ISO 14697:2007 Reaction-to-fire tests -- Guidance on the choice of substrates for building and transport products ISO 20632:2008 Reaction-to-fire tests -- Small room test for pipe insulation products or systems

120 121 122 123 124 125 126 127 128 129 130 131

ISO 3009:2003 ISO 3008:2006 ISO 834-9:2003 ISO 834-8:2002 ISO 834-7:2000 ISO 834-6:2000 ISO 834-5:2000 ISO 834-4:2000 ISO 834-3:1994 ISO 834-1:1999 ISO/TR 17252:2008 ISO 24473:2008 Fire tests -- Open calorimetry -- Measurement of the rate of production of heat and combustion products for fires of up to 40 MW Fire tests -- Applicability of reaction to fire tests to fire modelling and fire safety engineering Fire-resistance tests -- Elements of building construction -- Part 1: General requirements Fire-resistance tests -- Elements of building construction -- Part 3: Commentary on test method and test data application Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements Fire-resistance tests-Elements of building construction-Part 5: Specific requirements for loadbearing horizontal separating elements Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns Fire-resistance tests -- Elements of building construction -- Part 8: Specific requirements for non-loadbearing vertical separating elements Fire-resistance tests -- Elements of building construction -- Part 9: Specific requirements for non-loadbearing ceiling elements Fire resistance tests -- Door and shutter assemblies Fire-resistance tests -- Elements of building construction -- Glazed elements

132 133 134 135 136 137 138 139 140 141 142 ISO 10294-1:1996 ISO 6944-1:2008 ISO/TR 5925-2:2006 Fire tests -- Smoke-control door and shutter assemblies -- Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy Fire-resistance tests -- Contribution made by suspended ceilings to the protection of steel beams in floor and roof assemblies ISO 4736:1979 Fire tests -- Small chimneys -- Testing at elevated temperatures ISO/TR 6167:1984 Fire containment -- Elements of building construction -- Part 1: Ventilation ducts Fire resistance tests -- Fire dampers for air distribution systems -- Part 1: Test method ISO 10294-2:1999 Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results ISO 10294-3:1999 Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method ISO 10294-4:2001 Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism ISO 10294-5:2005 Fire resistance tests -- Fire dampers for air distribution systems -- Part 5: Intumescent fire dampers ISO 10295-1:2007 Fire tests for building elements and components -- Fire testing of service installations -- Part 1: Penetration seals ISO 12468-1:2003 External exposure of roofs to fire -- Part 1: Test method

143 144 145 146 147 148 149 150 ISO 12468-2:2005 External fire exposure to roofs -- Part 2: Classification of roofs ISO/TR 12470:1998 Fire-resistance tests -- Guidance on the application and extension of results ISO 12472:2003 Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals ISO 22899-1:2007 Determination of the resistance to jet fires of passive fire protection materials -- Part 1: General requirements ISO/TR 22898:2006 Review of outputs for fire containment tests for buildings in the context of fire safety engineering ISO 13571:2007 Life-threatening components of fire -- Guidelines for the estimation of time available for escape using fire data Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 1: Criteria Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 2: Evaluation of individual physical fire models ISO 16312-1:2006 ISO/TR 16312-2:2007 序号 标准文件代号 英文名称 Estimation of the lethal toxic potency of fire effluents 151 152 153 ISO/TS 19700:2007 Controlled equivalence ratio method for the determination of hazardous components of fire effluents ISO 13344:2004 ISO 19701:2005 Methods for sampling and analysis of fire effluents

154 155 156 157 158 159 160 161 162 163 164 ISO/TR 13387-1:1999 ISO 27368:2008 Analysis of blood for asphyxiant toxicants -- Carbon monoxide and hydrogen cyanide ISO 19706:2007 Guidelines for assessing the fire threat to people ISO 19702:2006 Toxicity testing of fire effluents -- Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis Generation and analysis of toxic gases in fire -- Calculation of species ISO 19703:2005 yields, equivalence ratios and combustion efficiency in experimental fires Fire safety engineering -- Part 1: Application of fire performance concepts to design objectives ISO/TR 13387-2:1999 Fire safety engineering -- Part 2: Design fire scenarios and design fires ISO/TR 13387-3:1999 Fire safety engineering -- Part 3: Assessment and verification of mathematical fire models ISO/TR 13387-4:1999 Fire safety engineering -- Part 4: Initiation and development of fire and generation of fire effluents ISO/TR 13387-5:1999 Fire safety engineering -- Part 5: Movement of fire effluents ISO/TR 13387-6:1999 Fire safety engineering -- Part 6: Structural response and fire spread beyond the enclosure of origin ISO/TR 13387-7:1999 Fire safety engineering -- Part 7: Detection, activation and suppression

165 166 167 168 169 170 171 172 173 174 175 176

ISO/TR 13387-8:1999 Fire safety engineering -- Part 8: Life safety -- Occupant behaviour, location and condition ISO 16730:2008 Fire safety engineering -- Assessment, verification and validation of calculation methods ISO/TS 16732:2005 Fire Safety Engineering -- Guidance on fire risk assessment ISO/TS 16733:2006 Fire safety engineering – Selection of design fire scenarios and design fires ISO 16734:2006 Fire safety engineering -- Requirements governing algebraic equations -- Fire plumes ISO 16735:2006 Fire safety engineering -- Requirements governing algebraic equations -- Smoke layers ISO 16736:2006 Fire safety engineering -- Requirements governing algebraic equations -- Ceiling jet flows ISO 16737:2006 Fire safety engineering -- Requirements governing algebraic equations -- Vent flows ISO 11612:1998 Clothing for protection against heat and flame -- Test methods and performance requirements for heat-protective clothing ISO 11613:1999 Protective clothing for firefighters -- Laboratory test methods and performance requirements ISO 15383:2001 Protective gloves for firefighters -- Laboratory test methods and performance requirements Protective clothing for firefighters -- Laboratory test methods and performance requirements for wildland firefighting clothing ISO 15384:2003

177 Protective clothing for firefighters -- Laboratory test methods and ISO 15538-2001 performance requirements for protective clothing with a reflective

outer surface