POS80 Thermal Printer User’s Manual
POS80 Thermal POS printer User’s manual
Catalogue
1.1 Brief introduction..........................................................................................................................................2 1.2 Main features ................................................................................................................................................2 2 specification .............................................................................................................................................................3
2.1 Specification .................................................................................................................................................3 2.2 Printing material requirements ......................................................................................................................5
2.2.1 Paper parameters ................................................................................................................................5 2.2.2 Mark paper parameters ......................................................................................................................5 2.2.3 Paper using attention ..........................................................................................................................5 2.3 Printing and paper cutting position ...............................................................................................................6
2.3.1 Printing position .................................................................................................................................6 2.3.2 Paper cut position ..............................................................................................................................6
3 Appearance and components ...................................................................................................................................7
3.1 Appearance and components ........................................................................................................................7 3.2 Indicator and buzzer instruction ...................................................................................................................8 4 Printer installation .................................................................................................................................................9
4.1 Open the package ..........................................................................................................................................9 4.2 Requirements of installation position ...........................................................................................................9 4.3 Connect to power adapter .............................................................................................................................9 4.4 Connect communication cables ....................................................................................................................9 4.5 Connect to cash drawer .................................................................................................................................9 4.6 Paper roll loading ........................................................................................................................................10
4.6.1 Printing paper type confirmation .....................................................................................................10 4.6.2 Loading/change paper roll ...............................................................................................................10 4.7 Set DIP switch ............................................................................................................................................12 4.8 Printer self-test ............................................................................................................................................12 4.9 Set ethernet port IP address .........................................................................................................................12 5 Interface pin definition ..........................................................................................................................................14
5.1 Parallel interface pin definition（DB25M） ..............................................................................................14 5.2 USB interface pin definition（standard B type female base) .....................................................................14 5.3 Power interface pin definition（MPC-3-001B） .......................................................................................15 5.4 Cash drawer interface pin definition（RJ11-6P6C） .................................................................................15 5.5 Serial port pin definition（DB9F） ...........................................................................................................16 5.6 Ethernet interface pin definition（RJ45） .................................................................................................16 6 Faults handling ......................................................................................................................................................17
6.1 Printer does not work ..................................................................................................................................17 6.2 Indicator light error and buzzer warning ....................................................................................................17 6.3 Problems when it is printing .......................................................................................................................17 6.4 Problems when cutting paper ......................................................................................................................18 6.5 Paper jam and cutter retraction troubles removal .......................................................................................18
1
POS80 Thermal POS printer User’s manual
1 Introduction
1.1 Brief introduction
POS80 is a thermal POS printer with auto-cutter. It has good printing quality, high printing speed and high stability, which is widely used in POS system, food service industry and many other fields.
POS80 connects other devices via parallel, serial or USB port. It offers drivers for WINDOWS and LINUX operating systems.
The supported operating systems are as below: WINDOWS XP WINDOWS 7 32/ WINDOWS 8
UBUNTU 12.04 32/ UBUNTU 14.04 32/
1.2 Main features
1) 2) 3) 4) 5) 6) 7) 8) 9)
With auto-cutter
Low noise and high printing speed Easy paper loading Easily use and maintain
Support mark paper and continuous paper printing Compatible with many kinds of paper width With cash drawer interface
Optional communication interfaces(Such as USB, parallel, serial, Ethernet)
Optional Wireless communication function(Wi-Fi or Bluetooth, just for special models)
2
POS80 Thermal POS printer User’s manual
2 Specification
2.1 Specification
Item
Printing method Resolution Printing width
Printing parameter
Printing speed Interfaces
Page mode Command set Storage
/ / RAM FLASH Chinese Words, figures User-defined
Thermal printing 203DPI,8 dots/mm 72mm(576 dots)
About 250 mm/s
Standard: cash drawer /USB interface Optional: serial/parallel/Ethernet ports
Optional Wireless Communication: Wi-Fi or Bluetooth Support(Optional)
ESC/POS compatible commands
RAM 8M bytes, receive buffer area 1M bytes FLASH 4M bytes, NV bitmap 256K bytes GB18030 24×24 ASCII 9×17,12×24
Support
Optional international character sets 45 TRADITIONAL CHINESE CHINESE
CP437 [U.S.A., Standard Europe] Katakana
CP850 [Multilingual] CP860 [Portuguese]
CP863 [Canadian-French] CP865 [Nordic] WCP1251 [Cyrillic] CP866 Cyrillic #2
MIK[Cyrillic /Bulgarian]
CP755 [East Europe，Latvian 2] Iran
CP862 [Hebrew] WCP1252 Latin I WCP1253 [Greek] CP852 [Latina 2]
CP858 Multilingual Latin Ⅰ+Euro) Iran II Latvian
CP8 [Arabic]
ISO-8859-1 [West Europe] CP737 [Greek] WCP1257 [Baltic] Thai
CP720[Arabic] CP855
Parameter
characters
Code pages
3
POS80 Thermal POS printer User’s manual
CP857[Turkish]
WCP1250[Central Europe] CP775
WCP1254[Turkish] WCP1255[Hebrew] WCP1256[Arabic] WCP1258[Vietnam] ISO-8859-2[Latin 2] ISO-8859-3[Latin 3] ISO-8859-4[Baltic] ISO-8859-5[Cyrillic] ISO-8859-6[Arabic] ISO-8859-7[Greek] ISO-8859-8[Hebrew] ISO-8859-9[Turkish] ISO-8859-15 [Latin 3] Thai2 CP856
Supports different density dots and images printings
Chart
/
Supports grating bitmap printing
Supports download bitmap printing, every bitmap size should less than 256K, and the total capacity of download bitmap is 256K. UPC-A、UPC-E、EAN-8、EAN13、CODE39、ITF、CODEBAR、CODE128、CODE93 PDF417、QR Code
Paper out, cover opened, paper will be lack(optional),un-take out printed paper(optional) Green Red Red
Standard thermal receipt paper 79.5±0.5mm 0.056~0.1mm 80mm(Max.) Easy paper loading
Manual or automatically cut paper ~40℃ ~ 70℃，≤93%RH（40℃） 145mm×195mm×144mm（W×L×H） 1.1Kg 50km
2,000,000 times
360,000 hours
Windows（WIN7/WIN8/Vista/XP/2000） Ubuntu 12.04 32/, Ubuntu 14.04 32/
Bar codes Detection function
1D 2D Sensor Power indicator
LED indicator Paper out indicator Error indicator
Type Width Thickness Diameter Paper loading Paper cutting
Paper Requirement
Physical characteristics
Operating condition -10℃ ~ 50℃，25% ~ 80%RH Storage condition Outline dimension
Weight TPH life
Reliability Cutter life Motor life
Software function Driver procedure
4
POS80 Thermal POS printer User’s manual
2.2 Printing material requirements 2.2.1 Paper parameters
1) 2) 3) 4)
Paper type: thermal receipt paper/thermal black mark paper Paper width:80±0.5 mm
Paper roll diameter: 80 mm (Max.) Paper thickness:0.065 ~ 0.10mm
2.2.2 Mark paper parameters
Black mark imprint position is on the front side of the receipt when using mark paper. The black mark reflectivity is no more than15%, the other parts of paper reflectivity should be more than 85%.There are not any patterns in black mark area, such as ad, and the mark size shall be satisfied with requirements as below:
2.2.3 Paper using attention
Note:
1) Please use good quality paper, otherwise, it will effect printing quality and even reduce printer head life. 2) Don’t make the paper stick on axis.
3) Paper will be fading out or reduced thermal sensitivity if it is polluted by chemical or oil, which will affect
printing effects.
4) Don’t use nail or hard things to clash printing paper, otherwise, it will be fade out.
5) Paper will be fading out if the environment temperature exceeds 70°C. So please take note the temperature,
humidity and illumination effects.
5
POS80 Thermal POS printer User’s manual
2.3 Printing and paper cutting position 2.3.1 Printing position
L1-Paper storehouse’s width: 82±0.5mm L2-Effective printing width: 80mm
L3-Distance between print head to paper storehouse’s left edge (fixed width): 3±0.3mm L4-Distance between print head to paper storehouse’s right edge (fixed width): 3±0.3mm L5-Left margin: Default is 4mm
L6-Printing area width: it is set by commands (refer to programming manual). Default is 72mm. L7-Right margin: Default is 4mm.
2.3.2 Paper cutting position
The distance between print head to cutter: 12.5mm
6
POS80 Thermal POS printer User’s manual
3 Appearance and components
3.1 Appearance and components
7
POS80 Thermal POS printer User’s manual
Function instruction of components 1）Power switch
Press “O” side to power off, press “I” side to power on. 2）Power indicator(green)
The indicator is on when power on, and it is off when power off.
3）Error indicator (Red)
Error indicator is on when it detects error. Such as: paper out, upper cover is open and cutter is stocked. 4）Paper indicator(red)
Paper out indicator is on when it detects the paper is out. Please put a new paper roll to printer inside then.
3.2 Indicator and buzzer instruction
1）Function instruction of indicators and buzzer
Name
Power indicator (Power) Error indicator (Error) Paper out indicator
（Paper）
Description Open printer cover Paper is enough Paper out
Power Indicator
On On On
Error Indicator
On Off On
Paper Indicator
On Off On
Buzzer
It rings 6 times by 1.5s.
Silent
It rings 3 times by 1.5s.
Status On Off On Off On Off
Instruction
Printer is power on Printer is power off Printer is in error status Printer is in normal status Printer is in paper out status Printer is in normal status
Note: Printer detects printer head temperature via thermal resistance. It will cut off print head power and stop printing if print head is overheat. The print head protection temperature is 80℃.
8
POS80 Thermal POS printer User’s manual
4 Printer installation
4.1 Open the package
Please make sure everything is in good status when you open the package. Otherwise, please contact to distributor in time.
4.2 Requirements of installation position
1) 2) 3) 4)
Put the printer on a stably place.
Let the printer far away from water, fire, and sunlight. Avoid to put it on oscillatory and impassive place. Make sure to connect printer with ground safety
4.3 Connect to power adapter
1) 2) 3) 4)
Make sure the printer is power off.
Connect power adapter’s DC output plug to the printer. Connect power adapter’s AC input plug to a power outlet.
Please be careful to operate correctly when plug out the plug of power cord to avoid damage.
4.4 Connect Communication cables
1) Make sure the printer is power off.
2) Connect communication cable to the printer’s port, and fix it as plug lag spike (or snap spring). 3) Connect communication cable to the other side host.
4.5 Connect to cash drawer
1) Make sure the printer is power off.
2) Connect cash drawer to cash drawer port behind the printer.
Warning: The Voltage of cash drawer port is 24V. (It cannot connect to telephone cable.)
9
POS80 Thermal POS printer User’s manual
4.6 Paper roll loading
4.6.1 Printing paper type confirmation
You can load paper roll to print after connecting power adapter and communication cables. Please make sure the printing paper type before printing. The default paper type is continuous thermal receipt paper.
4.6.2 Loading or change paper roll
1) Power off the printer.
2) Slide or press paper roll storehouse button, and then open storehouse cover.
3) Draw out paper roll tap, and load paper roll as below.
4) Draw out a printing paper, and leave some on the paper out month, then close the storehouse cover.
10
POS80 Thermal POS printer User’s manual
Warning: Please make sure the paper roll in tense status, if not, it maybe cause paper jam or other problems.
5) The status after paper loading
11
POS80 Thermal POS printer User’s manual
4.7 DIP switch setting
DIP switch Switch 1 2 3 4 5 6 7 8
Function Cutter Buzzer Printing density Multi-byte encoding Max. number of Printing characters in each line
Cash drawer Baud rate options (bps)
On Forbidden Enable Dark
Single-byte encoding
42 Enable
Ref. Chart 1
Off Enable Forbidden Light multi-byte encoding
48 Forbidden
Default Off On Off Off Off On Off Off
Chart 1：Baud rate options
Baud rate 9600 19200 38400 115200
Switch 7 On Off On Off
Switch 8 Off Off On on
19200 Default
4.8 Printing self-test page
1) Make sure the printer loaded paper roll correctly.
2) Press down [FEED] button and hold on, then power on the printer, the printer will print a self-test page.
4.9 Set Ethernet port IP Address.
The printer’s Ethernet IP address can be set directly via printer inserted web setting page. The operation steps are as below:
1. Connect printer and PC in a same Ethernet LAN.
2. Print a printer self-test page to get printer recent IP address (self-test page printing operation method refers to “4.8 printer self-test” instruction):
You can find the printer’s IP address is same as 192.168.1.87 in self-test page“IP address: 192.168.1.87” 3. Set network card IP address in PC and printer IP address as different IP address in the same network
segment.(Such as 192.168.1.xxx, xxx is a number among 1 to 254)；
4. Please enter address “http://printer IP address” in browse of PC after making sure that printer connects with Ethernet.(e.g.: If printer IP address is “192.168.1.87”, please enter “http://192.168.1.87”), then press Enter key,open Ethernet port setting page in browser as below:
12
POS80 Thermal POS printer User’s manual
5. Click “Configure Interface” link in the left side, then enter the modified target IP and click “save” button to save setting. Click “Reboot” button to reset printer if you want the setting to take effect.
6. Enter the new IP address as the above step 4 procedure, and re-open printer Ethernet port setting web page, then click “Printer Status” link in the left side. And click “Printer Test Page” button to print self-test page, and check the IP Address contents in the self-test page is right or not.
13
POS80 Thermal POS printer User’s manual
5 Interface pin definitions
The printer has a cash drawer driver interface and many kinds of communication interfaces: parallel, serial (RS-232), USB and Ethernet ports. USB port and cash drawer interfaces are standard interfaces, and it has Ethernet, serial and parallel ports as optional.
5.1 Parallel interface pin definition（DB25M）
Number Signal
1 2 3 4 5 6 7 8 9
/STROBE DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7
Function
Gate. Low level is effective Data bit is 0 Data bit is 1 Data bit is 2 Data bit is 3 Data bit is 4 Data bit is 5 Data bit is 6 Data bit is 7
Number 10 11 12 13 14 15 16 17 18-25
Signal /ACK BUSY PE SEL
Function
Confirm. Low level is effective Busy Paper out Choose
/AUTOFEED Change line automatically. Low
level is effective /ERROR /INIT /SELIN GND
Error. Low level is effective Initialize. Low level is effective Choose input. Low level is effective Ground wire
5.2 USB interface pin definition（standard B type female base)
1） Pin definition
Pin Number
1 2 3 4
Signal name VBUS D- D+ GND
Typical wire color
Red White Green Black
14
POS80 Thermal POS printer User’s manual
5.3 Power interface pin definition（MPC-3-001B）
1）Pin definition
Pin number
1 2 3 SHELL
Signal name +24V GND N.C F.G
5.4 Cash drawer interface pin definition（RJ11-6P6C）
1）Electrical specification Driver voltage: DC24V
Driver current: Max. 0.8A (within 510ms)
Cash drawer status tests signal: “L” = 0～0.5 V ; “H” = 3～5 V 2) Cash drawer interface socket uses RJ-11 6P type connector;
3) Interface signal definition Pin number
1 2 3 4 5 6 Notes:
1) Prohibit socket with power to pull out communication wire plug.
2) Please avoid to parallel with strong power when wring communication cables av通讯线布线时应避免和强电并行；
3) Communication cables use with shielded cables.
Signal FG DRAWER 1 DRSW VDR DRAWER 2 GND
function Printer cover Cash drawer 1 driver signal Cash drawer status detection signal
Cash drawer driver power Cash drawer 2 driver signal Common ground circuit
15
POS80 Thermal POS printer User’s manual
5.5 Serial port pin definition（DB9F）
Printer serial port is compatible with RS-232, the interface socket is DB9 female socket.
User can check interface setting status via printing setting self-test page. Printer default serial interface is set as: baud rate 19200bps, 8 bit data bits, no parity,1 bit stop bit, and the handshakes method is DTR/DSR。
Pin number 1 2 3 4 5 6 7 8 9
Definition CD TD RD DSR GND DTR CTS RTS RI
5.6 Ethernet interface pin definition（RJ45）
Pin number 1 2 3 4 5 6 7 8
Definition TX+ TX- RX+ n/c n/c RX- n/c n/c
16
POS80 Thermal POS printer User’s manual
6 Faults handling
Please refer to the methods as below when printer can’t work normally. Please contact your supplier directly if it still can’t work normally.
6.1 Printer does not work
Problems
Probably reasons
Solutions Power on printer
Press down the “O” side of printer button Contact with agents or factory directly
The Power indicator is not light. Printer is not power on. Printer does not work Printer switch is not on.
PCB is damaged
6.2 Indicator error and buzzer warning
Problems
Paper indicator is on constantly Buzzer warns
Paper out indicator light is on constantly
Error indicator is on constantly Buzzer warns
Error indicator is blinking Buzzer warns
Probably reasons Paper maybe out
Paper roll warehouse cover maybe lit up
Print head is overheated Voltage is too high Voltage is too low
Solutions
Load a new paper roll
Close paper roll warehouse cover correctly
Power off printer power, and wait that print head temperature returns normal. Use assigned voltage to print Use assigned voltage to print
6.3 Problems when it is printing
Problems
Color strips occur on the paper
Printing is not clear or have dirty spots
Probably reasons Paper maybe out
Paper roll loading incorrectly Paper can’t meet the requirements Print head or printer rubber roller is dirty
Printing density sets too light
Solutions
Load a new paper roll.
Check paper roll loading correctly or not Use the recommended thermal paper Clean print head or printer rubber roller Paper can output normally
Vertical printing contents get lost
Increase printing density to satisfy the requirements.
Paper jam Open upper cover or check paper feed channel to get to know paper jam.
Print head or printer rubber roller is Clean print head or printer rubber roller dirty
Print head error Contact supplier or factory directly 17
POS80 Thermal POS printer User’s manual
6.4 Problems when cutting paper
Problems
Probably reasons
Cutter is worn or cannot cut paper completely
Cutter blocked or cutter
Turbine and worm are worn
does not returned back.
Motor is burned-out Too many paper scraps
Cutting paper is not so Cutter month is worn or paper is good. too thick
The head piece is overheated Driver moves too fast
Paper jam
Paper feeds position is not right
Solutions Change cutter
Change turbine and worm Change motor
Eliminate scraps between all the spare parts. Change cutter
Reduce driver head piece heating power
Adjust the printing speed to allowable specification of TPH.
Put in the paper channel between rubber covered roller and TPH to Make paper parallel with it
6.5 Paper jam and cutter retraction troubles removal
Please power off if it is paper jam, and eliminate paper jam in correct method.
1. Press the paper cover and open it to eliminate paper jam. Then re-install paper roll to power on. 2. Please use the method as below if step 1 cannot open paper cover:
Warning: Do not open the paper roll warehouse cover forcibly when you cannot open it normally if it is paper jam, which to avoid damaging the printer.
1） Make sure the printer power is off.
2） Take off the cutter adjusting cover in vertical direction as photo.
3） Adjust paper-cutter to make the cutter set back to print mechanism completely as photo direction 4） Open paper cover and eliminate paper jam. 5） Install cutter adjusting cover vertically down.
6） Re-loading paper, close the paper cover and then power on.
18
因篇幅问题不能全部显示，请点此查看更多更全内容
Copyright © 2019- huatuo0.cn 版权所有 湘ICP备2023017654号-2
违法及侵权请联系：TEL:199 18 7713 E-MAIL:2724546146@qq.com
本站由北京市万商天勤律师事务所王兴未律师提供法律服务